The Inked Stamper-An evening of classes!!!

I do not give permission for reproduction or recreation of my artworks or creations. Thank you all for respecting this.

Thursday, November 22, 2012

Wall Sugar November Design Team Project - Christmas Spirit

Wall Sugar November Design Team Project - Christmas Spirit


MERRY CHRISTMAS EVERYONE!!!!.....oh wait it’s only November J but that’s alright Christmas is right around the bend. So when I received my Wall Sugar piece this month all I could think of was the Holidays! The possibilities were limitless with the Wall Sugar Co frame that I used.

So I started with the bare base (Wall Sugar Co Frame – Item# WSC109 12x24 frame)
I started my project by painting the outer edges and the inner edges of the plaque with Tim Holtz Distress Crackle Paint in Antique Linen. I wanted a very vintage, nostalgic Christmas project, and crackle paint adds that extra little flair. I know many of you are unsure of how to use crackle paint or you have had terrible luck when using it, but like anything it has a little bit of a trick to it. To make a good crackle you need to try and make a nice thick base with it. Try not to do layers, try to do one thick smooth coat. When you apply more than one coat it doesn’t dry evenly or it dries and cracks, but you are recovering it with each layer and then eventually you can end up with a very undesirable effect or worse case, no crackle at all. The thicker the coat, the better the crackle. If you are working on wood such as I did, it is best to base coat your project with an acrylic paint. This way the paint has something to crackle over instead of soaking into the wood. In this case though I wanted a progressively aging effect so I painted one think coat on and let it dry, so in some areas it soaked in and there is no crackle at all and in others it has quite a nice effect to it, as you can see below.
Next I covered the outer of the frame in Kaisercraft – Turtle Dove Collection – Baubles. This paper has a glossy embossing effect to it, plus it already has a soft brown edge to it which makes it look like it has been inked.
For the inset I used Kaisercraft Turtle Dove Collection – Drummers and Kaisercraft Twig and Berry Collection – December.
The poinsettias were a process. I started by using Jumbo Poinsettia by Stampendous and stamped it on xpressit copic paper using black Memento Ink. They were colored with copics. The colors are as follows:
Flower: R24 R27 R29
Leaves: YG93 YG95 YG97
Center: Y15 Y35 YR23
Colorless Blender
The flowers were then trimmed and some of the petals cut back to give dimension. I then inked them with Color Box Chalk in Chestnut Roan to give them the rustic burnished edges to create a flow through the project.
Next I used a burlap stocking by Canvas Corp and stitched all around the outer edges with Canvas Corp Red Rope – Hemp Rope. I then glued the stocking with hot glue to the frame. I then added the tags from Kaisercraft Turtle Dove Collection – To Froms and inked all the outer edges with Color Box Chalk – Chestnut Roan. I then hot glued them to the stocking and then hot glued two of the poinsettias.
Last I added the verse which was taken from Kaisercraft Turtle Dove Collection – Drummers and then I backed the verse in Kaisercraft Twig and Berry Collection – December. I then attached the verse to the frame with pop up dots. The side that drops down into the inset of the frame is a layer of three pop up dots to make the height even with the outer edge of the frame. Then I added my last three poinsettias below the verse with hot glue.
So there you have it, the completed project!
I hope you enjoyed taking the time to view my project as much as I enjoyed creating it!
Thank you for stopping by J



No comments:

Post a Comment